Self-generating linkage double regulating valve (type 132-080W)

Specification

number	components
first	BALEM 130 (Robot Valve)
2	Pressure reducing pilot valve
3	Hikvision Actuator
4	Flow Switch
5	Needle and filter valves
6	Two-way solenoid valve
7	Controller (Unisys)
8	Plug valve
9	pressure gauge
ten	Hydro
11	pilot valve

Y cut-off flange type

Vertical Ball Flange Type

Angle flange type

▼ Y-type globe valve size (mm)

Valve size	50	65	80	100	125	150	200	250	300	350	400	500	600	700	800	900	1000
large	230	290	310	350	400	480	600	610	700	730	910	1010	1200	1400	1480	1650	1800
H1	78	88	100	110	125	143	175	205	230	265	300	380	420	500	565	590	640
H2	188	211	236	270	333	353	461	519	615	629	753	893	1030	1255	1412	1461	1584
Ø和	135	154	180	220	260	305	380	455	545	545	705	794	934	1160	1215	1315	1400

▼ 直立式球阀和角阀尺寸（mm）

阀门尺寸	50	80	100	150	200	250	300
A sort of	238	305	381	508	645	756	864
Second	78	九十三	105	140	165	200	223
Cmax	200	240	275	375	470	535	625
最大	157	179	206	284	360	420	465
Ø和	140	165	208	326	408	497	562
F	119	152	191	254	322	378	432
G	83	102	127	152	203	219	349

※ The tolerance of the interface distance dimension (A, F, L) follows the tolerance standard in KS B ISO 5752 <Table 11>.

Robot series
shape and size	Upright sphere / square type	Y-shaped globe
	50～300A	50～1000A
work pressure	10kgf/㎠、16kgf/㎠、20kgf/㎠、25kgf/㎠
connection standard	Manufactured according to customer requirements
used liquid	Water/diesel (optional) Consult from head office/Fluid temperature: 0°C ~ 80°C

components	type of material
	standard		Elective
	50A~350A	400A~1000A
Body & Cover & Disc	Ductile Iron	cast steel	SSC 13
Diaphragm gasket	Ductile Iron	cast steel	SSC 13
Cover plugs and bearings	SSC 13
Shaft and seat	STS 304
diaphragm	NR/CR/NBR
disc seal	NR/CR/NBR

※ Epoxy coating of NSF/ANSI Standard 61 is standard.

▼ Y-type Globe flow chart

standard		mm	50	65	80	100	125	150	200	250	300	350	400	500	600	700	800	900	1000
standard		inch	2	2 ¹ / ₂ “	3	4	5	6	8	十	第十二	14	16	20	24	28	32	36	40
流量系数	Y型地球仪	kV	48	72	102	178	221	385	672	973	1382	1610	1834年	2863	3816	5311	7508	9130	13085
		CV	56	84	119	208	258	450	784	1137	1614	1881	2142	3344	4457	6203	8769	10664	15283

▼ 直立式 Globe & Angle 型流程图

标准		毫米	50	80	100	150	200	250	300
标准		英寸	2	3	4	6	8	十	第十二
流量系数	Globe type	千伏	四十六	97	177	361	618	970	1378
	Globe type	简历	54	113	207	422	722	1133	1610
	angle type	kV	57	121	220	459	779	1251	1764
	angle type	CV	sixty seven	141	257	536	910	1461	2060

Flow coefficient Kv or Cv=Q/√ΔP, Cv=1.168Kv

Kv: flow rate Q per hour at a differential pressure of 1 (㎥/hr) (kgf/㎠)

Cv: Flow rate Q (Gal/min) per minute at differential pressure 1 (PSI)

ΔP: Differential pressure across the valve (kgf/cm2 or PSI)

epoxy coating

All valves feature NSF/ANSI Standard 61 Epoxy Powder Coating as a base specification which provides excellent chemical resistance to seawater, certain acids, bases, chemicals and solvents to provide users with a hygienic water supply.

Product Selection Considerations

first.

Check the flow properties of the product and select the diameter suitable for the desired flow. If the aperture selection is too small, the supply flow is insufficient, and if the aperture is too large, chattering may occur.

2.	Our products are segmented by function. If you need other features, please contact us.

选择产品时需要说明的项目

型号	标准	形状	产品材质	连接标准	工作压力	主阀配件
请检查型号和产品名称。	50A～300A	G : 直立球型（卧式）	GCD : Ductile Iron STS : Stainless Steel WCB : Cast Steel	According 应客户要求_	10kgf/㎠16kgf/㎠20kgf/㎠25kgf/㎠	N: No CL: Model CL-01 ID: Model ID-01 SW: Model SW-01 VOR: Model VOR-01
		A : Angle type (vertical type)
	50A～1000A	Y : Y-shaped globe 형

Additional Information

first.

In the case of solenoid valves, please indicate the power and IP rating used. (eg 220V AC, 24V DC, 12V DC/IP65)

2.	If it is a pressure reducing valve and a relief valve, please indicate the set pressure. (Example: Set-3K)

3.	Check the fluid used. All products produced by our company are used for water, when used for fluids such as oil, jet oil, seawater, etc., please be sure to indicate this information.

write example	132-010, 100A, G, GCD, 1511-10K, N, set pressure 5
▶ Pressure reducing valve 100A, vertical cut-off type (horizontal), valve body material: ductile iron, working pressure 10K, flange KS B 1511-10K, set pressure 5kgf/cm2

※ Completely waterproof design, even if the manhole is flooded, it can be operated.

Self-generating linkage double regulating valve (type 132-080W)

Related products

Login