Robosys Robocon (Model 130-010)

Model 130-010 is designed to enable pressure control and flow control used in various water piping systems for efficient water resource management and maximization of flow rate. Various information of the piping system can be collected and stored through the port, and the current status of the piping system can be monitored/controlled in real time with the BALEM SCADA System or Industrial SCADA System provided by Barram through 4 communication ports. Excellent product.
In addition, by applying a 4.3″ LCD touch screen, anyone can use the desired function easily and quickly, and it has a powerful data logger function by using various sensors and a large-capacity built-in memory that can store data for 3 years without using it in conjunction with a valve. You can also use only

Category:
specification
Control by motor actuator Control by hydraulic actuator Direct control by sol valve
Components Quantity
BALEM 130 (Robocon Valve) One
Pressure Reducing Pilot Valve One
pressure gauge 2
Needle & Strainer One
Cock Valve 2
Motor Actuator One
Robosys Controller One
Motor Specifications
  • Rated voltage: 24V DC
    (used as power supply for RS-1102)

  • Working pressure: 0.5~25kgf/㎠
  • Gear Ratio: 1/721
  • Encoder : 2 Channel 26 Pulse
  • No Load Speed ​​RPM : 9
  • Rated Torque (Kg • Cm) : 12
  • RPM: 8.3
Components Quantity
BALEM 130 (Robocon Valve) One
Pressure Reducing Pilot Valve One
pressure gauge 2
Needle & Strainer One
Cock Valve 2
Hycon Actuator One
Robosys Controller One
Flow Controller One
Solenoid valve specifications
  • Rated voltage: 24V DC
    (used as power supply for RS-1102)
  • Working pressure: 0.5~25kgf/㎠
  • Insulation class: Coil Insulation
    Class B
  • Voltage guarantee rate: ±10%
  • Body material: Brass
Components Quantity
BALEM 130 (Robocon Valve) One
Needle & Strainer One
2-Way Solenoid Control
Valve (Normal Close)		 2
pressure gauge 2
Cock Valve 2
Robosys Controller One
Solenoid valve specifications
  • Rated voltage: 24V DC
    (used as power supply for RS-1102)
  • Working pressure: 0.5~25kgf/㎠
  • Insulation class: Coil Insulation
    Class B
  • Voltage guarantee rate: ±10%
  • Body material: Brass
※ Power consumption may vary depending on the sensor.

 

 
rated voltage 24V DC (requires external power supply)
Power Consumption 40W (may increase with additional sensors)
Dimensions 256 X 218 X 119 (mm)
external input 8 4-20 mA analog ports, 3 digital ports
display 4.3″ (480 X 282) TFT LCD TSP (Touch Screen Panel)
Communication RS 232 /RS 485, LAN (option: modem, dedicated line modem, CDMA)
case IP65 waterproof rating

※ When ordering, be sure to indicate the number and type of ports you want to use. 
Eight 4-20mA analog ports
       (1st pressure, 2nd pressure, valve opening/closing rate, instantaneous flow rate, CP, PAS, spare port 1, spare port 2)
3 digital ports

       (Accumulated flow, spare port 1, spare port 2)

 

Barram Co., Ltd. provides various control methods for efficient and accurate water resource management. By installing a motor drive device on the existing pilot valve, it is possible to automatically control the pressure and flow, just as the piping system manager operates the valve according to the pressure or flow situation. Rate control is also possible.
Through the 8 analog signal input ports and 3 pulse signal input ports built into the Robosys controller (RS-1102), it is possible to collect and store various information of the piping system. The current status of the piping system can be monitored/controlled in real time with the BALEM SCADA System or the Industrial SCADA System.
Using a large-capacity flash memory, operating data for about 3 years can be stored, and only powerful data logger functions can be used using various sensors without interlocking with a valve.
It can be applied to various situations by applying a profile that can be set for 24 hours in units of 5 minutes, and a weight (±) for each month, day of the week, holiday, and weight. Safer and more precise control is possible by using the pressure that changes during control as data.
 
 

Y-type Globe type flange type Up-right Globe Flanged Type Angle type flange type

▼ Y-type Globe type valve size (mm)

valve size 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L 230 290 310 350 400 480 600 610 700 730 910 1010 1200 1400 1480 1650 1800
H1 78 88 100 110 125 143 175 205 230 265 300 380 420 500 565 590 640
H2 188 211 236 270 333 353 461 519 615 629 753 893 1030 1255 1412 1461 1584
ØE 135 154 180 220 260 305 380 455 545 545 705 794 934 1160 1215 1315 1400

   ▼ Up-right Globe & Angle type valve size (mm)

valve size 50 80 100 150 200 250 300
A 238 305 381 508 645 756 864
B 78 93 105 140 165 200 223
Cmax 200 240 275 375 470 535 625
Dmax 157 179 206 284 360 420 465
ØE 140 165 208 326 408 497 562
F 119 152 191 254 322 378 432
G 83 102 127 152 203 219 349
※ The tolerance of the inter-face distance dimensions (A, F, L) follows the tolerance standard in <Table 11> of KS B ISO 5752. 

Robocon series
shape and size
Up-right Globe / Angle Type
Y-Type Globe
50 to 300A
50 to 1000A
working pressure 10kgf/cm2, 16kgf/cm2, 20kgf/cm2, 25kgf/cm2
Connection standard Manufactured according to customer requirements
used fluid Water / Diesel (Optional) Contact the head office / Fluid temperature: 0°C ~ 80°C
Components material type
Standard Optional
50A~350A 400A~1000A
Body & Cover & Disc Ductile Iron Cast Steel SSC 13
diaphragm washer Ductile Iron Cast Steel SSC 13
Cover Plugs & Bearings SSC 13
Shaft & Seat STS 304
diaphragm NR / CR / NBR
disc seal NR / CR / NBR
※ Epoxy coating of NSF/ANSI Standard 61 is standard. 
         ▼ Y-type Globe type flow chart
standard mm 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
inch 2 2  1/2 ” _ _ 3 4 5 6 8 10 12 14 16 20 24 28 32 36 40
flow coefficient Y-Type Globe Kv 48 72 102 178 221 385 672 973 1382 1610 1834 2863 3816 5311 7508 9130 13085
Cv 56 84 119 208 258 450 784 1137 1614 1881 2142 3344 4457 6203 8769 10664 15283
         ▼ Up-right Globe & Angle Flow Chart
standard mm 50 80 100 150 200 250 300
inch 2 3 4 6 8 10 12
flow coefficient Globe Type Kv 46 97 177 361 618 970 1378
Cv 54 113 207 422 722 1133 1610
Angle Type Kv 57 121 220 459 779 1251 1764
Cv 67 141 257 536 910 1461 2060
Flow coefficient Kv or Cv = Q/√ΔP, Cv = 1.168Kv 
Kv: Flow rate per hour Q (㎥/hr) at differential pressure 1 (kgf/㎠)
Cv: Flow per minute Q (Gal/min) at differential pressure 1 (PSI)
ΔP : pressure difference between both ends of the valve (kgf/cm2 or PSI)
epoxy coating
By applying NSF/ANSI Standard 61 epoxy powder coating to all valves as a basic specification, it has excellent chemical resistance to seawater, certain acids, bases, chemicals and solvents, and provides hygienic water supply to users.
Notes on product selection 
One. Check the flow performance of the product and select a diameter suitable for the required flow rate. If you select too small a bore, the supply flow will be insufficient, and if you select too large a bore, chattering may occur.
2. Our products are segmented by function. If you want additional features, please contact us.
Items to be stated when selecting a product 
model number standard shape product material Connection standard working pressure Main valve accessories
Please check the model number and
product name .		 50A to 300A G  : Up-right Globe type
(horizontal type)		 GCD  :
Ductile Iron
STS  :
Stainless Steel
WCB :
Cast Steel		 According
to
Customer
Request		 10kgf/cm216kgf/cm220kgf/cm225kgf/cm2 N : None
CL : Model CL-01
ID : Model ID-01
SW : Model SW-01
VOR : Model VOR-01
A  : Angle type (vertical type)
50A to 1000A Y  : Y-type Globe type
Additional information 
One. In the case of solenoid valves, indicate the power used and IP class. (eg 220V AC, 24V DC, 12V DC/IP65)
2. In the case of pressure reducing valves and relief valves, indicate the set pressure. (Example: Set-3K)
3. Check the fluid used. All products produced by our company are for water use, and when used in fluids such as oil, jet oil, seawater, etc., be sure to indicate this information.
writing example 132-010, 100A, G, GCD, 1511-10K, N, set pressure 5
▶ Pressure reducing valve 100A, up-right globe type (horizontal type), body material: ductile iron, working pressure 10K,
flange KS B 1511-10K, set pressure 5kgf/cm2
 
 
      ※  For ROBOSYS users, BALEM SCADA SYSTEM is provided free of charge.
Pipeline monitoring system setting function
     Series and parallel pipelines can be freely implemented, and the pipeline status can be monitored in real time.

Related products

Remote control valve

Self-generating linkage double regulating valve (type 132-080W)

Remote control valve

Self-powered timing dual control valve (model 132-060W)

Remote control valve

Waterman (Model 130-010W)