Non-return Type One-Way Altitude Valve (Model 131-063)

Repetitive and accurate water level control

Prevention of supply pressure drop when supplying

Complete and reliable shut-off capability

Reliable water pressure operation method Built-

in control method

check function that is easy to adjust

Category:
specification

Y-type Globe type flange type Up-right Globe Flanged Type Angle type flange type

▼ Y-type Globe type valve size (mm)

valve size 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L 230 290 310 350 400 480 600 610 700 730 910 1010 1200 1400 1480 1650 1800
H1 78 88 100 110 125 143 175 205 230 265 300 380 420 500 565 590 640
H2 188 211 236 270 333 353 461 519 615 629 753 893 1030 1255 1412 1461 1584
ØE 135 154 180 220 260 305 380 455 545 545 705 794 934 1160 1215 1315 1400

   ▼ Up-right Globe & Angle type valve size (mm)

valve size 50 80 100 150 200 250 300
A 238 305 381 508 645 756 864
B 78 93 105 140 165 200 223
Cmax 200 240 275 375 470 535 625
Dmax 157 179 206 284 360 420 465
ØE 140 165 208 326 408 497 562
F 119 152 191 254 322 378 432
G 83 102 127 152 203 219 349
※ The tolerance of the inter-face distance dimensions (A, F, L) follows the tolerance standard in <Table 11> of KS B ISO 5752. 

Robocon series
shape and size
Up-right Globe / Angle Type
Y-Type Globe
50 to 300A
50 to 1000A
working pressure 10kgf/cm2, 16kgf/cm2, 20kgf/cm2, 25kgf/cm2
Connection standard Manufactured according to customer requirements
used fluid Water / Diesel (Optional) Contact the head office / Fluid temperature: 0°C ~ 80°C
Components material type
Standard Optional
50A~350A 400A~1000A
Body & Cover & Disc Ductile Iron Cast Steel SSC 13
diaphragm washer Ductile Iron Cast Steel SSC 13
Cover Plugs & Bearings SSC 13
Shaft & Seat STS 304
diaphragm NR / CR / NBR
disc seal NR / CR / NBR
※ Epoxy coating of NSF/ANSI Standard 61 is standard. 
         ▼ Y-type Globe type flow chart
standard mm 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
inch 2 2  1/2 ” _ _ 3 4 5 6 8 10 12 14 16 20 24 28 32 36 40
flow coefficient Y-Type Globe Kv 48 72 102 178 221 385 672 973 1382 1610 1834 2863 3816 5311 7508 9130 13085
Cv 56 84 119 208 258 450 784 1137 1614 1881 2142 3344 4457 6203 8769 10664 15283
         ▼ Up-right Globe & Angle Flow Chart
standard mm 50 80 100 150 200 250 300
inch 2 3 4 6 8 10 12
flow coefficient Globe Type Kv 46 97 177 361 618 970 1378
Cv 54 113 207 422 722 1133 1610
Angle Type Kv 57 121 220 459 779 1251 1764
Cv 67 141 257 536 910 1461 2060
Flow coefficient Kv or Cv = Q/√ΔP, Cv = 1.168Kv 
Kv: Flow rate per hour Q (㎥/hr) at differential pressure 1 (kgf/㎠)
Cv: Flow per minute Q (Gal/min) at differential pressure 1 (PSI)
ΔP : pressure difference between both ends of the valve (kgf/cm2 or PSI)
epoxy coating
By applying NSF/ANSI Standard 61 epoxy powder coating to all valves as a basic specification, it has excellent chemical resistance to seawater, certain acids, bases, chemicals and solvents, and provides hygienic water supply to users.
Notes on product selection 
One. Check the flow performance of the product and select a diameter suitable for the required flow rate. If you select too small a bore, the supply flow will be insufficient, and if you select too large a bore, chattering may occur.
2. Our products are segmented by function. If you want additional features, please contact us.
Items to be stated when selecting a product 
model number standard shape product material Connection standard working pressure Main valve accessories
Please check the model number and
product name .		 50A to 300A G  : Up-right Globe type
(horizontal type)		 GCD  :
Ductile Iron
STS  :
Stainless Steel
WCB :
Cast Steel		 According
to
Customer
Request		 10kgf/cm216kgf/cm220kgf/cm225kgf/cm2 N : None
CL : Model CL-01
ID : Model ID-01
SW : Model SW-01
VOR : Model VOR-01
A  : Angle type (vertical type)
50A to 1000A Y  : Y-type Globe type
Additional information 
One. In the case of solenoid valves, indicate the power used and IP class. (eg 220V AC, 24V DC, 12V DC/IP65)
2. In the case of pressure reducing valves and relief valves, indicate the set pressure. (Example: Set-3K)
3. Check the fluid used. All products produced by our company are for water use, and when used in fluids such as oil, jet oil, seawater, etc., be sure to indicate this information.
writing example 132-010, 100A, G, GCD, 1511-10K, N, set pressure 5
▶ Pressure reducing valve 100A, up-right globe type (horizontal type), body material: ductile iron, working pressure 10K,
flange KS B 1511-10K, set pressure 5kgf/cm2

 

Related products

Altitude valve

One-way Two-Level Altitude Valve (Model 131-062)

Altitude valve

Two-Level Altitude Valve (Model 131-072)

Altitude valve

Solenoid Control and Non-Return Type One-Way Altitude Valve (Model 131-064)

Altitude valve

Two-way Altitude Valve (Model 131-071)

Altitude valve

One-way Altitude Valve (Model 131-061)